[cisco-voip] Enabling Ringtones 7940/60

[Todd Franklin]

When I go to my 7940s and choose Settings then Ring Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already a bunch in there) and
have edited RingList.xml to add the new ringtones.
I have stopped and started the TFTP service as well. I still only have
access to 2 ringtones.

Am I missing something?

Thanks.

[Matt Slaga (US)]

Check the formatting of your ringlist.xml file. Also, if you are
running 5.x, Ringlist.xml must have the first letter capitalized for
some insane reason.



In your ringlist.xml file, make sure you completed all of your "<" and
"/>". An easy way to see this is to open the file up in IE and see if
the formatting is off where it shouldn't be.







From: cisco-voip-***@puck.nether.net
[mailto:cisco-voip-***@puck.nether.net] On Behalf Of Todd Franklin
Sent: Thursday, March 22, 2007 9:30 AM
To: cisco-***@puck.nether.net
Subject: [cisco-voip] Enabling Ringtones 7940/60



When I go to my 7940s and choose Settings then Ring Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already a bunch in there)
and have edited RingList.xml to add the new ringtones.
I have stopped and started the TFTP service as well. I still only have
access to 2 ringtones.

Am I missing something?

Thanks.



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

[Todd Franklin]

OK, I got that done,thanks.
I downloaded some ringtones for Cisco phones, they are *.raw
I put them in the TFTP folder, edit the XML file accordingly. They show up
on the phones as a choice, but when you try to play them you get "Ring File
Unavailable!"

Check the formatting of your ringlist.xml file. Also, if you are running
5.x, Ringlist.xml must have the first letter capitalized for some insane
reason.
In your ringlist.xml file, make sure you completed all of your "<" and
"/>". An easy way to see this is to open the file up in IE and see if the
formatting is off where it shouldn't be.
*Sent:* Thursday, March 22, 2007 9:30 AM
*Subject:* [cisco-voip] Enabling Ringtones 7940/60
When I go to my 7940s and choose Settings then Ring Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already a bunch in there) and
have edited RingList.xml to add the new ringtones.
I have stopped and started the TFTP service as well. I still only have
access to 2 ringtones.
Am I missing something?
Thanks.
------------------------------
* Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. *

[Todd Franklin]

Never mind! File permissions!!!!
Got it!

Post by Todd Franklin
OK, I got that done,thanks.
I downloaded some ringtones for Cisco phones, they are *.raw
I put them in the TFTP folder, edit the XML file accordingly. They show
up on the phones as a choice, but when you try to play them you get "Ring
File Unavailable!"

Post by Matt Slaga (US)
Check the formatting of your ringlist.xml file. Also, if you are
running 5.x, Ringlist.xml must have the first letter capitalized for
some insane reason.
In your ringlist.xml file, make sure you completed all of your "<" and
"/>". An easy way to see this is to open the file up in IE and see if the
formatting is off where it shouldn't be.
*On Behalf Of *Todd Franklin
*Sent:* Thursday, March 22, 2007 9:30 AM
*Subject:* [cisco-voip] Enabling Ringtones 7940/60
When I go to my 7940s and choose Settings then Ring Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already a bunch in there)
and have edited RingList.xml to add the new ringtones.
I have stopped and started the TFTP service as well. I still only have
access to 2 ringtones.
Am I missing something?
Thanks.
------------------------------
* Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. *

[Paul Choi]

I am not sure if this is the case with CCM also but
for CCME you must edit RingList.xml and
DistinctiveRingList.xml and upload both of them. You
must also upload all of the ringtones as well as setup
the tftp-server to upload these files to phones when
they're requested.

Post by Todd Franklin
When I go to my 7940s and choose Settings then Ring
Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already
a bunch in there) and
have edited RingList.xml to add the new ringtones.
I have stopped and started the TFTP service as well.
I still only have
access to 2 ringtones.
Am I missing something?

____________________________________________________________________________________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html

[Paul Choi]

*nix files are case-sensitive unlike Windows.

Post by Matt Slaga (US)
Check the formatting of your ringlist.xml file.
Also, if you are
running 5.x, Ringlist.xml must have the first letter
capitalized for
some insane reason.
In your ringlist.xml file, make sure you completed
all of your "<" and
"/>". An easy way to see this is to open the file
up in IE and see if
the formatting is off where it shouldn't be.
Behalf Of Todd Franklin
Sent: Thursday, March 22, 2007 9:30 AM
Subject: [cisco-voip] Enabling Ringtones 7940/60
When I go to my 7940s and choose Settings then Ring
Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already
a bunch in there)
and have edited RingList.xml to add the new
ringtones.
I have stopped and started the TFTP service as well.
I still only have
access to 2 ringtones.
Am I missing something?
Thanks.

____________________________________________________________________________________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121

[Matt Slaga (US)]

I was referring more to the programmers rather than the OS.

-----Original Message-----
From: Paul Choi [mailto:***@yahoo.com]
Sent: Thursday, March 22, 2007 1:18 PM
To: Matt Slaga (US); Todd Franklin; cisco-***@puck.nether.net
Subject: Re: [cisco-voip] Enabling Ringtones 7940/60

*nix files are case-sensitive unlike Windows.

Post by Matt Slaga (US)
Check the formatting of your ringlist.xml file.
Also, if you are
running 5.x, Ringlist.xml must have the first letter
capitalized for
some insane reason.
In your ringlist.xml file, make sure you completed
all of your "<" and
"/>". An easy way to see this is to open the file
up in IE and see if
the formatting is off where it shouldn't be.
Behalf Of Todd Franklin
Sent: Thursday, March 22, 2007 9:30 AM
Subject: [cisco-voip] Enabling Ringtones 7940/60
When I go to my 7940s and choose Settings then Ring
Type, I only have 2
options (Chirp1 and Chirp2)
I have added other RAW files (and there are already
a bunch in there)
and have edited RingList.xml to add the new
ringtones.
I have stopped and started the TFTP service as well.
I still only have
access to 2 ringtones.
Am I missing something?
Thanks.

________________________________________________________________________
____________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo!
Games.
http://videogames.yahoo.com/platform?platform=120121
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.